SL2-63A RCD circuit breaker (Residual Current Breaker)

1. Ambient temperature: - 5 ℃ ~ + 40 ℃. The average temperature in 24h does not exceed + 35 ℃.

2. Altitude: no more than 2000m.

3. Pollution level: 3.

4. Installation conditions:

a. Installation type and type: the installation category is II and III, and the installation type is rail installation;

b. Generally, the circuit breaker should be installed vertically, with the handle upward as the power on position;

c. There should be no significant impact and vibration, corrosive and explosive gas at the installation site;

d. DIN standard rail (TH35-7.5 type) is adopted;

e. The external magnetic field of the installation site should not exceed 5 times of the geomagnetic field in any direction;

f. Wiring mode: screw down the wiring.

 SL2-63 RCD circuit breaker(RCCB) Specification

Type	Standard		IEC/EN 61008-1
Electrical features	Leakage type		Electromagnetic type
	Rated current In	A	16, 25, 32,40, 50, 63, 80,100
	Type (wave form of the earth leakage sensed)		A, AC
	Poles	P	2,4
	Rated voltage Ue	V	240/415
	Insulation voltage Ui	V	500
	Rated frequency	Hz	50/60
	Rated breaking capacity Inc=I△c	A	4500,6000
	SCPD fuse	A	6000
	Rated impulse withstand voltage (1.2/50) Uimp	V	6000
	Dielectric test voltage at ind. Freq, for lmin	kV	2.5
	Rated sensitivity I?n	A	0.03, 0.1, 03
	Rated residual making and breaking capacity I△m	A	500(In<40A); 630(In >40A)
	Pollution degree		2
Mechanical features	Electrical life	t	4000
	Mechanical life	t	8000
	Protection degree		IP20
	Storage temperature	°C	・25~+70
	Ambient temperature (with daily averages35°C)	°C	-5-+40
Installation	Terminal connection type		Cable/U-type bar/Pin-type busbar
	Terminal size top / bottom for cable	mm2	25
		AWG	18-3
	Terminal size top / bottom for busbar	mm2	25
		AWG	18-3
	Tightening torque	N*m	2.5
		In-Ibs	18
	Mounting	On DIN rail EN 60715(35mm)by means of fast clip device
	Connection		From top and bottom